Genuine Jhemcu Ruibet Four-in-One ESC 45A 55A 3-6s Dshot600blheli_S for Fpv Drone Sprayers Dshot600blheli_S Function Remote

First of all, the tvs board that comes with our packaging box mainly suppressesvoltage greater than 26v, that is, the level of 6s. Players are often mismatched.since i solder this module or not, i still don't solder this module; simple summaryif it is 6s installed, then solder it. if it is 4s installed, it can be welded or not (thereis no damage to the solder). In addition, a friendly reminder, since most of thecurrent flight control and aio are bmi270 and ima42688 sensors, they must bewelded with electrolytic capacitors at the power input for filter wave treatmentThe function principle is as follows: currently, most of the pcba boards in the fpvindustry are supported to the maximum voltage of 6s, but in the selection ofcomponents, the basic withstand voltage is theoretical value of 30-36v, when thebrushless motor brakes from high speed to low speed, the motor will generateextremely high reverse electric forces, this voltage will far exceed the maximumvoltage resistance of 30v components above pcba, the performance will often burnout is the dc power supply part or esc. Adding the tvs board, when the motorgenerates voltage higher than 26v, this tvs board will work, the reverse electric forceof this motor will suppress it. it will not allow the voltage above 26v to appear on thecircuit board, which will protect the pcba to operate safely under 26v conditions,thereby reducing the chance of burning flight control, esc, and aio.